Concrete Stamp Mat,Concrete Stamps Concrete Molds,Concrete Texture Skin,Concrete Texture Mat,Decorative Concrete Cement Imprint Texture Stamp Mat Polyurethane Stamping,for Home Patios,Garden Paths

DetailsConvenient Handles: The convenient handles allow you to move and lift them with less effort, making operation easier.Right Corners: The right corners allow you to easily align the corners, making corner stamping easy.Construction of Stamped Ground1. Complete the formwork erection, paving, vibrating, grouting, leveling, and concrete pavement according to the construction procedures.2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required.4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3.5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.6. After the initial setting of the color strengthening material, when the surface is dry and hasn't obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.33 lbs.7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can be sprayed with a roller brush or spray barrel.SpecificationsColor: RedMaterial: PUProcess: Vacuum High-temperature Heating MoldingAssembly Required: NoOperation Mode: ManualProduct Size: 72*30*1.5cm/28*11.8*0.6inchPackaging Size: 30*72*1.5cm/11.8*28*0.6inchGross Weight: 2.4kg/5.29lbsPackage Included1*Concrete Texture MatNotes1. Please check the size carefully before ordering.2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• Strong Structure: The 0.5-inch thick PU offers high flexibility, sturdy edges, tensile strength, and high adhesion to this product, keeping it durable and flexible for long-term concrete stamping.
• Easy to Carry: Its lightweight(5.29 lbs) and stackable design allow you to carry it to any construction site with ease.
• Made of thick polyurethane, the stamp pad offers maximum flexibility, strong edges, tensile strength, and high adhesion. It is durable and flexible for long-term concrete stamping.
• Concrete Stamp can be used on vertical or horizontal surfaces.With two convenient handles on the back for easy carrying and lifting, you can easily overlap our concrete textured skins in different locations, align them easily and install them faster.
• Application Concrete Texture Skin can create beautiful, tural textures on your concrete surfaces. Widely used in home yards, garden paths, hotel lobbies, decorative plazas, sidewalks, roads, parking lots, garages, and anywhere you want a tural, rustic stone texture.